1 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change stacked film capacitor chips nswc series features ? stacked metallized polyethylene naphthalate (pen) film ? standard eia 1206, 1210, 1913, 2416, 2820, 3022 and 3925 sizes ? wide temperature range up to +125 o c* ? high heat and moisture resistant ? very stable temperature, frequency and voltage bias n characteristics ? reflow soldering only ? tape and reel packaging environmental characteristics recommended land pattern (mm) c a b nswc is recommended for new designs specifications case sizes 1206 1210 1913 2416 2820 3022 3925 capacitance range 0.001 ~ 0.0047 f 0.0056 ~ 0.01 f 0.012 ~ 0.082 f 0.1 ~ 0.15 f 0.18 ~ 0.33 f 0.39 ~ 0.47 f 0.56 ~ 1.0 f votage ratings 100vdc capacitance tolerance 0.001 ~ 0.01 f 5% (j) only, 0.012 ~ 0.15 f 5% (j) or 10% (k), 0.18 ~ 1.0 f 10% (k) only temperature range -55c ~ +105c (0.001 f ~ 0.01 f) -55c ~ +125c (0.012 f ~ 1.0 f with derating above +85c) dissipation factor (20c) 1.0% max. @ 1khz insulation resistance (20c) 3 gigohms or 1000 /f whichever is lower dielectric withstanding voltage 150% of rated voltage 60 seconds life test at +105c 1,000 hours at 125% of rated voltage (125c for 0.012 f ~ 1.0 f) capacitance change within +1%/-6% of initial value dissipation factor 1.1% maximum insulation resistance 1 gigohm minimum or 300 /f whichever is lower resistance to soldering heat: +240c peak capacitance change within 5% for 0.012 ~ 1.0 f or 3% for 0.001 ~ 0.01 f of initial value dissipation factor 1.1% max. for 0.012 ~ 1.0 f or 0.66% max. for 0.001 ~ 0.01 f insulation resistance 1 gigohm minimum or 300 /f whichever is lower humidity load life (90% ~ 95% rh) (1) 1,000 hours, +40c 500 hours for 0.012 f ~ 1.0 f (2) 500 hours, +60c for 0.001 ~ 0.01 f capacitance change (1) +8%/-5% (2) 10% of initial value dissipation factor (1) 1.5% max. (2) 2.0% max. insulation resistance (1) 100 megohm min. or 30 /f (2) 10 megohm min. or 3 /f whichever is lower solderability with 25% wt rosin-methanol flux 90% minimum coverage after 2.5 second dip into 245c solder pot eia size a b c 1206 1.8 3.6 1.4 1210 1.8 3.6 2.3 1913 2.6 6.6 3.0 2416 3.8 7.8 3.8 2820 4.5 9.0 4.6 3022 5.1 9.7 5.0 3925 7.2 11.9 5.7 nswc 823 j 100 tr d4 n f rohs compliant optional high temp. re ow (+250c)* size code tape & reel voltage tolerance code: j = 5% capacitance in pf, 1st two digits are signi cant, 3rd digit is no. of zeros series part number system *special packaging and handling required. recommended reflow profile standard: +240 c peak temperature +250c special order (see part numbering system) 50 100 150 200 250 300 time temperature - deg. c pre-heat 150c ~ 180c 120 sec. max. 25 0 cool down time above 220c 60 sec. max. ramp-up 25c ~ 150c 90 sec. max. *see part number system for details rohs compliant includes all homogeneous materials
2 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change stacked film capacitor chips 100v standard products and case sizes terminations: stacked element l 1 h w p p l 2 fig. 2 (b2~c3) 95.5% sn, 4% ag and 0.5% cu over phenolic resin/ag/ni/cu over copper base stacked element terminations: l 1 h w p p l 2 fig. 1 (d1~r8) 95.5% sn, 4% ag and 0.5% cu over phosphorus copper barrier over copper base nswc series part number cap. value cap. code size code length l 0.2 width w height h 0.2 p eia nswc102j100trb2f 0.001 102 b2 3.2 0.2 1.6 0.2 1.1 0.3 0.65 0.3 (fig. 1) 1206 nswc122j100trb2f 0.0012 122 b2 nswc152j100trb2f 0.0015 152 b2 nswc182j100trb2f 0.0018 182 b2 nswc222j100trb2f 0.0022 222 b2 nswc272j100trb2f 0.0027 272 b2 nswc332j100trb3f 0.0033 332 b3 1.5 0.3 nswc392j100trb3f 0.0039 392 b3 NSWC472J100TRB3F 0.0047 472 b3 nswc562j100trc2f 0.0056 562 c2 3.2 0.2 2.5 0.2 1.5 1210 nswc682j100trc2f 0.0068 682 c2 nswc822j100trc3f 0.0082 822 c3 2.1 nswc103j100trc3f 0.010 103 c3 nswc123*100trd1f 0.012 123 d1 4.8 0.2 3.3 0.3 1.4 0.35 0.2 (fig. 2) 1913 nswc153*100trd1f 0.015 153 d1 nswc183*100trd1f 0.018 183 d1 nswc223*100trd1f 0.022 223 d1 nswc273*100trd1f 0.027 273 d1 nswc333*100trd1f 0.033 333 d1 nswc393*100trd1f 0.039 393 d1 nswc473*100trd2f 0.047 473 d2 2.0 nswc563*100trd2f 0.056 563 d2 nswc683*100trd3f 0.068 683 d3 2.4 nswc823*100trd4f 0.082 823 d4 2.8 nswc104*100tre1f 0.1 104 e1 6.0 0.2 4.1 0.3 1.8 2416 nswc124*100tre3f 0.12 124 e3 2.4 nswc154*100tre4f 0.15 154 e4 2.8 nswc184k100trg1f 0.18 184 g1 7.1 0.2 5.0 0.4 2.0 2820 nswc224k100trg2f 0.22 224 g2 2.4 nswc274k100trg3f 0.27 274 g3 2.9 nswc334k100trg5f 0.33 334 g5 3.5 nswc394k100trq1f 0.39 394 q1 7.7 0.2 5.5 0.4 3.4 3022 nswc474k100trq2f 0.47 474 q2 4.0 nswc564k100trr1f 0.56 564 r1 9.8 0.2 6.3 0.4 3.0 3925 nswc684k100trr3f 0.68 684 r3 3.6 nswc824k100trr6f 0.82 824 r6 4.3 nswc105k100trr8f 1.0 105 r8 5.1 *these values available in j (5%) or k (10%) tolerance.
3 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change tape dimensions (mm) 21.0 0.8 17.4 1.0 13.4 1.0 80 1.0 2.0 0.5 330 2.0 13.0 0.5 embossed plastic carrier f 1.5 +0.1 -0 p t c w 1.75 0.1 b a 4.0 0.1 d ? case code a0.1 b0.1 c0.2 t w0.3 f p0.1 d+0.2/-0 qty/reel b2 1.9 3.5 1.5 0.25 8.0 3.5 4.0 1.0 3,000 b3 1.9 2,000 c2 2.8 1.9 2,000 c3 2.5 2,000 d1 3.8 5.1 2.0 0.3 0.05 12.0 5.5 0.05 8.0 1.5 3,000 d2 2.6 3,000 d3, d4 3.4 2,000 e1, e2 4.6 6.3 2.7 - 3,000 e3, e4 3.5 2,000 g1 ~ g5 5.5 7.4 4.7 1,500 q1, q2 6.91 8.43 5.685 0.343 0.013 16.0 7.5 0.1 12.0 1.5 1,000 r1 ~ r8 8.94 10.54 5.795 1,000 stacked film capacitor chips nswc series
|
